recently we published the unboxing and assembly videos of the new Tarantula Pro from Tevo.
So, after those videos, many of you asked for our opinion and review of this printer.
It’s a bit early to give a final review since we have more tests and prints to do.
However, we decided to make this initial review video and show you guys some of the prints we made so far.
All the test prints are made with PLA filament.
If you missed the unboxing or the assembly video, check the links below:
Other videos you must watch:
3D Printer HOTENDS – Troubleshooting Leaks & Clogs
How to check and calibrate the STEPS
STLs used in this video:
Fluffy The Unicorn
Bruce the Shark
Pearl the Octopus
You can buy this printer here:
(For banggood, use the following link and enter this special discount code on checkout: BGTarantula )
*** If you like our work and want to help the channel, you can contribute using one of the following…
Use our email to send your donation ( email@example.com )
* You can also help by using our affiliate links to shop at these sites (costs you nothing and you are contributing to the channel):
Other parts that can be used with the Tevo Tarantula PRO:
Thank you so much for your support 🙂
FOLLOW US ON SOCIAL MEDIA:
#3DPrinting #3DPrint #TarantulaPro
Music by YouTube Library
Copycat – R.LUM.R
Xem thêm các bài viết về Công Nghệ: https://arabsn.net/category/cong-nghe/
27 thoughts on “Tevo TARANTULA PRO (3D Printer) – First Prints & Review”
Do you have the BLTouch kit? Do you know the length of the brass spacers?
I would print usable car parts ect.. people are printing literally junk models, dear God just keep wasting the pla.
Can we please get a comparison video between the Tarantula Pro and the Ender 3? They seem to be the top two printers in the price range but I can’t find a comparison anywhere.
What machine settings should I use for it In cura?
Thank you as always Rui.
so what printer you recomend: the Creality Ender 3 or Tevo TARANTULA PRO.
What filament would work in the tarantula pro that wouldnt melt in a hot car?
nice video rui…can you share your profile for Cura..
Hi, i have and issue my tarantula pro print a few times nicely and then X homing start to fail and i'm getting printer halted warning because homing it's failing before any print idk why it print Nice like for 3 days
It seems that there is still a fair amount of ghosting on this machine, particularly on the Y-axis. It was certainly noticeable in the videos, at least.
hmm…im confused ender 3 or tarantula pro?can u add video pros and cons…
this 3d printer support resume when power outage happen?
Hello, sorry if they question is not about the video, What software do You use to transfor the stl files yo gcodes and what's settings do you use ?
I plan on day one giving this a shot with the TMC drivers I bought. Anyone know other than adding a fan what changes will be needed?
no resume when lose power?
make detail video on 32 bit controller board tell about advantages on printing speed accuracy etc
can 32 bit controller board installed in tevo tarantula pro instead of MKS GEN L
What is better? A ender 3 pro or a Tarantula pro?
Could you put out a video or link that tells what slicer you used and how you have the printer profile set up for you?
Could anyone help me with what I guess is uneven layers or under extrusion? https://youtu.be/oEYCxtg6fFU
What layer height was the models printed at?
Little bit offtopic: I read that PTFE fumes are really dangerous for parrots (many posts from pet owners which killed their parrots by using PTFE coated pan) I have bore heatbreak should I use my printer only outside or do you think its is safe? I have seen that you have budgie on fb profile pic so I'm asking you.
Thanks a lot for the video ! One quick question: why is the heatbreak with a PTFE liner worse than the option where the PTFE tube goes all the way down ? I had to change the hot end on my Nereus and I have to say now with a linered heat break I don't have to struggle with the bowden tube any more. Thanks !
Looks like a much better kit than the original Tarantula, especially the open power supply difference. Good job Tevo and great work Rui and Sandra! 🙂
Thanks for another great video !!! Do you have e profile for Tevo Nereus ? Cura or IdeaMaker ! Thanks
Which would you recommend for a starting on, ender 3 or tarantula pro?
I like the way you paint your nails mister.