Asus ROG Maximus XI Formula Review – VRM cooling by EKWB!



Today Leo takes a good look at the Asus ROG Maximus XI Formula . motherboard – how does it shape up? Read more over at www.kitguru.net

Test system
CPU: Intel Core i9-9900K
Motherboard: Asus Maximus XI Formula
RAM: 16GB G.Skill TridentZ Royal DDR4-3200MHz
CPU Cooler: Fractal Design Celsius S24
Graphics: Nvidia RTX 2080 Founders Edition 8GB GDDR6
SSD: 1TB Intel SSD 7 M.2 NVMe
Power Supply: Seasonic Prime Platinum 1300W

CPU Cooler Custom loop components:
CPU Block: EKWB Velocity RGB
Pump/Reservoir: EKWB XRES 140 Revo D5 RGB PWM
Radiator: Alphacool NexXxos XT30 240mm
Fittings: Alphacool 10/16mm
Coolant: Corsair XT5
Thermal Compound: Arctic MX-4

VRM Custom loop components:
Pump/Reservoir: Phanteks R220C with DDC
Radiator: Alphacool NexXxos XT30 120mm
Fittings: Alphacool 10/16mm
Coolant: Corsair XT5

Check out KITGURU MERCH over here:

Discord invite link:

Steam Community

Be sure to support us on PATREON and read our MANTRA on HONEST REVIEWS Here:

KitGuru uses a variety of equipment to produce content:
As of May 2019:
Panasonic GH5 and GH5s Cameras
Panasonic GH4 Cameras
Panasonic G7 Cameras
DJI OSMO Pocket Cameras
Canon Cameras
Various PC builds

Final output – colour grading/titling etc:
iMac Pro 18 Core/Vega 64/128GB
iMac 2019 9900k Vega 48/64/1TB
Adobe Premiere Pro CC (PC)
Davinci Resolve Studio 14/15 (Mac)
iPad Pro 12.9 inch (2018) machines with LumaFusion
Final Cut Pro (Mac)

Visit our facebook page over here!

Visit our Twitter page over here!

#maximusXI #asusrog #asusformula

source: https://arabsn.net

Xem thêm các bài viết về Công Nghệ: https://arabsn.net/category/cong-nghe/

22 thoughts on “Asus ROG Maximus XI Formula Review – VRM cooling by EKWB!

  1. I have the motherboard and on the new BIOS makes a lot of difference overclocking CPU temperatures 22 9900k at 5gb vram at 18 but you need to put time and effort into setting the BIOS up I can achieve some crazy scores on benchmark programs don't listen it isn't overclocking motherboard

  2. Whoa, please do GENE next. Very good work, I just thinking about switching from GENE to Formula ..Gene doesn't have ARGB..lol ASUS, thor, helios out of luck to sync without terminal.

  3. I flashed the Bios Version 1302 but it sucked hard. I installed Version 1201 again = Works with 5 ghz again :)) Cheers

  4. No point in this board since it's on the normal consumer class CPU's ….. I can see this type of MOBO on the HEDT line of CPU's but this is not that

  5. Let me try your profiles. I did have a little more tweaking but bottom line super stable and temps all around is well below as expected. I measure on probe and temps gun. Price is high but here is the model that is the best sold. Thanks Mr Leo And yes. sames results as you. It appear like the board is protecting itself. Butt results are mix. And yes in these boards from asus. There is almost NO difference on stock xmp1 YES values and 5.0 ghz. even with 1.29 volts on the vcore. is like 200points. It is interesting to dig that. I have push on aio to 5.2 on 29/32C ambient and still perform well. But the extreme is another story. Is a limitation…. maybe. You can have access to one so try the same specs on bios and check. will be interesting. Also there is changes on 1302 bios that differ on the last version. but is better And my opinion is a board that anyone can OC and also yes… there are other boards can do better but a lot more tweaking

  6. and yes: we DONT NEED OVERCLOCKING anymore! Thats the old era when CPUs were 2-core,4-cores,even 1core! Now we have enough power for dayly use cases in simple scenarios! Sadly people are greedy in everything,in memory,in GHZ, in FPS,in resolution, in MBS,in oHms. 🧐😔

  7. And now more important note: i watch you and enjoy on the same level of education and getting useful secrets/tips/hacks as i watch as my daily dose Buildzoid’s videos every single day! THANK YOU- you make me a little smarter every day, LEO!!

  8. breathing into microphone-makes me positive and think-wow ,i am not the only one who sniffles all day long,its pretty normal😂😂😂🤣🤣

  9. My concerns with this board are:
    1) PCH heatsink under the plastic "armor".
    2) Improperly ventilated cases might pose an issue with VRM thermals if the water cooling is not used.
    3) Adding an additional 15-30W of heat into the custom loop might affect the (water cooled) GPU performance, maybe even the CPU's.
    4) At this price point I was expecting a monoblock that covers both the CPU socket and the active VRM components.
    5) The board has a useless 4-pin CPU power connector instead of a much better suited 6/8 pin PCI-e connector for the 3 PCI-e slots.
    6) The ATX 24-pin connector is not right-angled like the SATA and USB ones that sit on the same side of the board.
    7) One of the fan headers at the bottom should be at the top next to the CPU power connectors. (This is just really, really minor and nitpicking.)

    I find everything else perfectly fine, justifiable (cheaper power stages) and appropriate for the price point and the socket that it powers.

  10. Having recently bought the ASUS ROG Strix Gaming-E, I can definitely confirm that the price of mmotherboards are currently eye-watering. Ouch. Just ouch.

  11. Ain't you about a year late with this ?
    P.S. If you are watching this and think about purchasing it, don't. Get Apex XI instead. Much better VRM that could run without a heatsink at all, this is gimmick board for those who don't know no better.

Leave a Reply

Your email address will not be published. Required fields are marked *